We work with trailers used by contractors, landscapers and other owners who need their equipment back in service. Our approach is straightforward: identify the damaged area, explain the proposed repair and agree on the work before it starts. A quick call is a useful first step, but we may need to see the trailer in person to understand how far the damage extends.
What We Repair on Dump Trailers
Heavy loads and repeated dumping put stress on more than one part of a trailer. A bent gate can affect its hinges and latch; a damaged lift bracket can put stress on the metal around its mounting point. Tell us about everything you have noticed, including a change in how the gate closes or the bed lifts. Looking at the surrounding area matters as much as looking at the broken piece.
Tailgates, Hinges and Latches
A gate that drags, twists or no longer closes squarely can interrupt loading and unloading. Midland Fab straightens bent dump trailer tailgates, rebuilds hinges and replaces latch pins. If the hinge area or nearby metal is also damaged, show us the connection between the gate and the trailer body. We can discuss the repair as a whole rather than quote a pin without seeing why it failed. When you call about the gate, mention how it sits both open and closed if you can see that safely. That gives us a better starting point for understanding whether the issue is alignment, a hinge, a latch or several parts together.
Walls, Floor Plates and Frame Rails
A trailer body can take a hit from the material it carries or from repeated loading. Midland Fab reinforces damaged walls and patches floor plates. We also repair fractured frame rails and use gusseting where appropriate to reinforce a structural repair. The length of a crack isn't the whole story: the location, the surrounding metal and the way the trailer is used all matter. Tell us whether the trouble appeared after a specific impact or developed over time. We will look at what the repair involves before agreeing on the work. Structural welds are warrantied.
Ramps and Spring Assists
A bent ramp can make loading awkward; a spring assist that no longer works as expected makes the same task harder. We straighten ramps and handle spring-assist fixes on dump trailers. Tell us about both sides of the ramp and the damaged hinge or spring area so we can get a feel for the problem. If the ramp and tailgate both need work, discuss them in the same call. That gives the shop a clearer picture of the repair than treating each symptom as an unrelated job.
Hydraulic Lift Brackets
The lift bracket connects a working part of the dumping mechanism to the structure around it. If that bracket is cracked, bent or pulling away, describe what happened and show us both the bracket and its mounting area. Midland Fab repairs hydraulic lift brackets and can discuss adjacent structural work if the surrounding metal also needs attention. Our listed work is bracket repair; do not assume from this page that we service every pump, cylinder or hydraulic component. We will tell you what we can take on after we understand the damage.
A Repair Conversation That Starts With the Damage
You do not need to decide whether a tailgate should be straightened or a hinge should be rebuilt before calling. Explain what the trailer is doing: a gate that will not latch, a ramp that has changed position, a floor that has worn through or a lift bracket that appears damaged. Walking it through on the phone helps us understand the problem, especially when you cover both the wider area and the specific damage.
We offer same-day estimates and affordable shop rates. We will discuss the proposed work and its price before beginning the agreed repair. An estimate given over the phone may need confirmation once the trailer is at the shop; we would rather explain that openly than promise a repair price without seeing the affected metal. Our aim is fast shop turnaround, with the schedule discussed for the specific job rather than assumed from a general statement on a website.
Bring Your Trailer to Our Ogden Shop
Midland Fab is at 2940 Midland Dr Suite #200, Ogden, UT 84401. The shop serves trailer owners in Ogden, West Haven, Roy, Clearfield and Layton across Weber and Davis counties. Whether the problem is a bent tailgate, a damaged floor or a fracture near the lift bracket, contact us before bringing in the trailer if you want to talk through the visible damage. We perform the agreed repair at the shop and stand behind our work with a satisfaction guarantee. Structural welds are warrantied.
If you are unsure whether the trailer should be moved in its current condition, tell us what is broken when you call. This page is a way to start a repair conversation, not a determination that a damaged trailer is safe to tow. We can discuss what we need to see and what the shop can repair once we understand the problem.
Talk to Midland Fab About Your Dump Trailer
A tailgate problem can be simple to describe even when the repair takes more than one step. Call Midland Fab and tell us about the gate, hinge, floor, frame, ramp or lift bracket that needs attention. We will discuss an estimate, explain the proposed shop repair and help you get the trailer back to work. You will find us at 2940 Midland Dr Suite #200 in Ogden.